FreeBSD/Linux/UNIX General Commands Manual
Hypertext Man Pages
perlfaq9

PERLFAQ9(1)	       Perl Programmers Reference Guide 	   PERLFAQ9(1)



NAME
       perlfaq9 - Networking ($Revision: 1.28 $, $Date: 2005/12/31 00:54:37 $)

DESCRIPTION
       This section deals with questions related to networking, the internet,
       and a few on the web.

       What is the correct form of response from a CGI script?

       (Alan Flavell  answers...)

       The Common Gateway Interface (CGI) specifies a software interface
       between a program ("CGI script") and a web server (HTTPD). It is not
       specific to Perl, and has its own FAQs and tutorials, and usenet group,
       comp.infosystems.www.authoring.cgi

       The CGI specification is outlined in an informational RFC:
       http://www.ietf.org/rfc/rfc3875

       Other relevant documentation listed in:
       http://www.perl.org/CGI_MetaFAQ.html

       These Perl FAQs very selectively cover some CGI issues. However, Perl
       programmers are strongly advised to use the CGI.pm module, to take care
       of the details for them.

       The similarity between CGI response headers (defined in the CGI speci-
       fication) and HTTP response headers (defined in the HTTP specification,
       RFC2616) is intentional, but can sometimes be confusing.

       The CGI specification defines two kinds of script: the "Parsed Header"
       script, and the "Non Parsed Header" (NPH) script. Check your server
       documentation to see what it supports. "Parsed Header" scripts are sim-
       pler in various respects. The CGI specification allows any of the usual
       newline representations in the CGI response (it's the server's job to
       create an accurate HTTP response based on it). So "\n" written in text
       mode is technically correct, and recommended. NPH scripts are more
       tricky: they must put out a complete and accurate set of HTTP transac-
       tion response headers; the HTTP specification calls for records to be
       terminated with carriage-return and line-feed, i.e ASCII \015\012 writ-
       ten in binary mode.

       Using CGI.pm gives excellent platform independence, including EBCDIC
       systems. CGI.pm selects an appropriate newline representation
       ($CGI::CRLF) and sets binmode as appropriate.

       My CGI script runs from the command line but not the browser.  (500
       Server Error)

       Several things could be wrong.  You can go through the "Troubleshooting
       Perl CGI scripts" guide at

	       http://www.perl.org/troubleshooting_CGI.html

       If, after that, you can demonstrate that you've read the FAQs and that
       your problem isn't something simple that can be easily answered, you'll
       probably receive a courteous and useful reply to your question if you
       post it on comp.infosystems.www.authoring.cgi (if it's something to do
       with HTTP or the CGI protocols).  Questions that appear to be Perl
       questions but are really CGI ones that are posted to
       comp.lang.perl.misc are not so well received.

       The useful FAQs, related documents, and troubleshooting guides are
       listed in the CGI Meta FAQ:

	       http://www.perl.org/CGI_MetaFAQ.html

       How can I get better error messages from a CGI program?

       Use the CGI::Carp module.  It replaces "warn" and "die", plus the nor-
       mal Carp modules "carp", "croak", and "confess" functions with more
       verbose and safer versions.  It still sends them to the normal server
       error log.

	   use CGI::Carp;
	   warn "This is a complaint";
	   die "But this one is serious";

       The following use of CGI::Carp also redirects errors to a file of your
       choice, placed in a BEGIN block to catch compile-time warnings as well:

	   BEGIN {
	       use CGI::Carp qw(carpout);
	       open(LOG, ">>/var/local/cgi-logs/mycgi-log")
		   or die "Unable to append to mycgi-log: $!\n";
	       carpout(*LOG);
	   }

       You can even arrange for fatal errors to go back to the client browser,
       which is nice for your own debugging, but might confuse the end user.

	   use CGI::Carp qw(fatalsToBrowser);
	   die "Bad error here";

       Even if the error happens before you get the HTTP header out, the mod-
       ule will try to take care of this to avoid the dreaded server 500
       errors.	Normal warnings still go out to the server error log (or wher-
       ever you've sent them with "carpout") with the application name and
       date stamp prepended.

       How do I remove HTML from a string?

       The most correct way (albeit not the fastest) is to use HTML::Parser
       from CPAN.  Another mostly correct way is to use HTML::FormatText which
       not only removes HTML but also attempts to do a little simple format-
       ting of the resulting plain text.

       Many folks attempt a simple-minded regular expression approach, like
       "s/<.*?>//g", but that fails in many cases because the tags may con-
       tinue over line breaks, they may contain quoted angle-brackets, or HTML
       comment may be present.	Plus, folks forget to convert entities--like
       "<" for example.

       Here's one "simple-minded" approach, that works for most files:

	   #!/usr/bin/perl -p0777
	   s/<(?:[^>'"]*|(['"]).*?\1)*>//gs

       If you want a more complete solution, see the 3-stage striphtml program
       in http://www.cpan.org/authors/Tom_Christiansen/scripts/striphtml.gz .

       Here are some tricky cases that you should think about when picking a
       solution:

	   

	   

	   

	   

	   <# Just data #>

	   >>>>>>>>>>> ]]>

       If HTML comments include other tags, those solutions would also break
       on text like this:

	   

       How do I extract URLs?

       You can easily extract all sorts of URLs from HTML with "HTML::Sim-
       pleLinkExtor" which handles anchors, images, objects, frames, and many
       other tags that can contain a URL.  If you need anything more complex,
       you can create your own subclass of "HTML::LinkExtor" or
       "HTML::Parser".	You might even use "HTML::SimpleLinkExtor" as an exam-
       ple for something specifically suited to your needs.

       You can use URI::Find to extract URLs from an arbitrary text document.

       Less complete solutions involving regular expressions can save you a
       lot of processing time if you know that the input is simple.  One solu-
       tion from Tom Christiansen runs 100 times faster than most module based
       approaches but only extracts URLs from anchors where the first
       attribute is HREF and there are no other attributes.

	       #!/usr/bin/perl -n00
	       # qxurl - tchrist@perl.com
	       print "$2\n" while m{
		   < \s*
		     A \s+ HREF \s* = \s* (["']) (.*?) \1
		   \s* >
	       }gsix;

       How do I download a file from the user's machine?  How do I open a file
       on another machine?

       In this case, download means to use the file upload feature of HTML
       forms.  You allow the web surfer to specify a file to send to your web
       server.	To you it looks like a download, and to the user it looks like
       an upload.  No matter what you call it, you do it with what's known as
       multipart/form-data encoding.  The CGI.pm module (which comes with Perl
       as part of the Standard Library) supports this in the start_multi-
       part_form() method, which isn't the same as the startform() method.

       See the section in the CGI.pm documentation on file uploads for code
       examples and details.

       How do I make a pop-up menu in HTML?

       Use the  and  tags.  The CGI.pm module (available from
       CPAN) supports this widget, as well as many others, including some that
       it cleverly synthesizes on its own.

       How do I fetch an HTML file?

       One approach, if you have the lynx text-based HTML browser installed on
       your system, is this:

	   $html_code = `lynx -source $url`;
	   $text_data = `lynx -dump $url`;

       The libwww-perl (LWP) modules from CPAN provide a more powerful way to
       do this.  They don't require lynx, but like lynx, can still work
       through proxies:

	   # simplest version
	   use LWP::Simple;
	   $content = get($URL);

	   # or print HTML from a URL
	   use LWP::Simple;
	   getprint "http://www.linpro.no/lwp/";

	   # or print ASCII from HTML from a URL
	   # also need HTML-Tree package from CPAN
	   use LWP::Simple;
	   use HTML::Parser;
	   use HTML::FormatText;
	   my ($html, $ascii);
	   $html = get("http://www.perl.com/");
	   defined $html
	       or die "Can't fetch HTML from http://www.perl.com/";
	   $ascii = HTML::FormatText->new->format(parse_html($html));
	   print $ascii;

       How do I automate an HTML form submission?

       If you are doing something complex, such as moving through many pages
       and forms or a web site, you can use "WWW::Mechanize".  See its docu-
       mentation for all the details.

       If you're submitting values using the GET method, create a URL and
       encode the form using the "query_form" method:

	   use LWP::Simple;
	   use URI::URL;

	   my $url = url('http://www.perl.com/cgi-bin/cpan_mod');
	   $url->query_form(module => 'DB_File', readme => 1);
	   $content = get($url);

       If you're using the POST method, create your own user agent and encode
       the content appropriately.

	   use HTTP::Request::Common qw(POST);
	   use LWP::UserAgent;

	   $ua = LWP::UserAgent->new();
	   my $req = POST 'http://www.perl.com/cgi-bin/cpan_mod',
			  [ module => 'DB_File', readme => 1 ];
	   $content = $ua->request($req)->as_string;

       How do I decode or create those %-encodings on the web?

       If you are writing a CGI script, you should be using the CGI.pm module
       that comes with perl, or some other equivalent module.  The CGI module
       automatically decodes queries for you, and provides an escape() func-
       tion to handle encoding.

       The best source of detailed information on URI encoding is RFC 2396.
       Basically, the following substitutions do it:

	   s/([^\w()'*~!.-])/sprintf '%%%02x', ord $1/eg;   # encode

	   s/%([A-Fa-f\d]{2})/chr hex $1/eg;		    # decode
	       s/%([[:xdigit:]]{2})/chr hex $1/eg;	    # same thing

       However, you should only apply them to individual URI components, not
       the entire URI, otherwise you'll lose information and generally mess
       things up.  If that didn't explain it, don't worry.  Just go read sec-
       tion 2 of the RFC, it's probably the best explanation there is.

       RFC 2396 also contains a lot of other useful information, including a
       regexp for breaking any arbitrary URI into components (Appendix B).

       How do I redirect to another page?

       Specify the complete URL of the destination (even if it is on the same
       server). This is one of the two different kinds of CGI "Location:"
       responses which are defined in the CGI specification for a Parsed Head-
       ers script. The other kind (an absolute URLpath) is resolved internally
       to the server without any HTTP redirection. The CGI specifications do
       not allow relative URLs in either case.

       Use of CGI.pm is strongly recommended.  This example shows redirection
       with a complete URL. This redirection is handled by the web browser.

	     use CGI qw/:standard/;

	     my $url = 'http://www.cpan.org/';
	     print redirect($url);

       This example shows a redirection with an absolute URLpath.  This redi-
       rection is handled by the local web server.

	     my $url = '/CPAN/index.html';
	     print redirect($url);

       But if coded directly, it could be as follows (the final "\n" is shown
       separately, for clarity), using either a complete URL or an absolute
       URLpath.

	     print "Location: $url\n";	 # CGI response header
	     print "\n";		 # end of headers

       How do I put a password on my web pages?

       To enable authentication for your web server, you need to configure
       your web server.  The configuration is different for different sorts of
       web servers---apache does it differently from iPlanet which does it
       differently from IIS.  Check your web server documentation for the
       details for your particular server.

       How do I edit my .htpasswd and .htgroup files with Perl?

       The HTTPD::UserAdmin and HTTPD::GroupAdmin modules provide a consistent
       OO interface to these files, regardless of how they're stored.  Data-
       bases may be text, dbm, Berkeley DB or any database with a DBI compati-
       ble driver.  HTTPD::UserAdmin supports files used by the "Basic" and
       "Digest" authentication schemes.  Here's an example:

	   use HTTPD::UserAdmin ();
	   HTTPD::UserAdmin
		 ->new(DB => "/foo/.htpasswd")
		 ->add($username => $password);

       How do I make sure users can't enter values into a form that cause my
       CGI script to do bad things?

       See the security references listed in the CGI Meta FAQ

	       http://www.perl.org/CGI_MetaFAQ.html

       How do I parse a mail header?

       For a quick-and-dirty solution, try this solution derived from "split"
       in perlfunc:

	   $/ = '';
	   $header = ;
	   $header =~ s/\n\s+/ /g;	# merge continuation lines
	   %head = ( UNIX_FROM_LINE, split /^([-\w]+):\s*/m, $header );

       That solution doesn't do well if, for example, you're trying to main-
       tain all the Received lines.  A more complete approach is to use the
       Mail::Header module from CPAN (part of the MailTools package).

       How do I decode a CGI form?

       (contributed by brian d foy)

       Use the CGI.pm module that comes with Perl.  It's quick, it's easy, and
       it actually does quite a bit of work to ensure things happen correctly.
       It handles GET, POST, and HEAD requests, multipart forms, multivalued
       fields, query string and message body combinations, and many other
       things you probably don't want to think about.

       It doesn't get much easier: the CGI module automatically parses the
       input and makes each value available through the "param()" function.

	       use CGI qw(:standard);

	       my $total = param( 'price' ) + param( 'shipping' );

	       my @items = param( 'item' ); # multiple values, same field name

       If you want an object-oriented approach, CGI.pm can do that too.

	       use CGI;

	       my $cgi = CGI->new();

	       my $total = $cgi->param( 'price' ) + $cgi->param( 'shipping' );

	       my @items = $cgi->param( 'item' );

       You might also try CGI::Minimal which is a lightweight version of the
       same thing.  Other CGI::* modules on CPAN might work better for you,
       too.

       Many people try to write their own decoder (or copy one from another
       program) and then run into one of the many "gotchas" of the task.  It's
       much easier and less hassle to use CGI.pm.

       How do I check a valid mail address?

       You can't, at least, not in real time.  Bummer, eh?

       Without sending mail to the address and seeing whether there's a human
       on the other end to answer you, you cannot determine whether a mail
       address is valid.  Even if you apply the mail header standard, you can
       have problems, because there are deliverable addresses that aren't
       RFC-822 (the mail header standard) compliant, and addresses that aren't
       deliverable which are compliant.

       You can use the Email::Valid or RFC::RFC822::Address which check the
       format of the address, although they cannot actually tell you if it is
       a deliverable address (i.e. that mail to the address will not bounce).
       Modules like Mail::CheckUser and Mail::EXPN try to interact with the
       domain name system or particular mail servers to learn even more, but
       their methods do not work everywhere---especially for security con-
       scious administrators.

       Many are tempted to try to eliminate many frequently-invalid mail
       addresses with a simple regex, such as "/^[\w.-]+\@(?:[\w-]+\.)+\w+$/".
       It's a very bad idea.  However, this also throws out many valid ones,
       and says nothing about potential deliverability, so it is not sug-
       gested.	Instead, see http://www.cpan.org/authors/Tom_Chris-
       tiansen/scripts/ckaddr.gz , which actually checks against the full RFC
       spec (except for nested comments), looks for addresses you may not wish
       to accept mail to (say, Bill Clinton or your postmaster), and then
       makes sure that the hostname given can be looked up in the DNS MX
       records.  It's not fast, but it works for what it tries to do.

       Our best advice for verifying a person's mail address is to have them
       enter their address twice, just as you normally do to change a pass-
       word.  This usually weeds out typos.  If both versions match, send mail
       to that address with a personal message that looks somewhat like:

	   Dear someuser@host.com,

	   Please confirm the mail address you gave us Wed May	6 09:38:41
	   MDT 1998 by replying to this message.  Include the string
	   "Rumpelstiltskin" in that reply, but spelled in reverse; that is,
	   start with "Nik...".  Once this is done, your confirmed address will
	   be entered into our records.

       If you get the message back and they've followed your directions, you
       can be reasonably assured that it's real.

       A related strategy that's less open to forgery is to give them a PIN
       (personal ID number).  Record the address and PIN (best that it be a
       random one) for later processing.  In the mail you send, ask them to
       include the PIN in their reply.	But if it bounces, or the message is
       included via a "vacation" script, it'll be there anyway.  So it's best
       to ask them to mail back a slight alteration of the PIN, such as with
       the characters reversed, one added or subtracted to each digit, etc.

       How do I decode a MIME/BASE64 string?

       The MIME-Base64 package (available from CPAN) handles this as well as
       the MIME/QP encoding.  Decoding BASE64 becomes as simple as:

	   use MIME::Base64;
	   $decoded = decode_base64($encoded);

       The MIME-Tools package (available from CPAN) supports extraction with
       decoding of BASE64 encoded attachments and content directly from email
       messages.

       If the string to decode is short (less than 84 bytes long) a more
       direct approach is to use the unpack() function's "u" format after
       minor transliterations:

	   tr#A-Za-z0-9+/##cd;			 # remove non-base64 chars
	   tr#A-Za-z0-9+/# -_#; 		 # convert to uuencoded format
	   $len = pack("c", 32 + 0.75*length);	 # compute length byte
	   print unpack("u", $len . $_);	 # uudecode and print

       How do I return the user's mail address?

       On systems that support getpwuid, the $< variable, and the Sys::Host-
       name module (which is part of the standard perl distribution), you can
       probably try using something like this:

	   use Sys::Hostname;
	   $address = sprintf('%s@%s', scalar getpwuid($<), hostname);

       Company policies on mail address can mean that this generates addresses
       that the company's mail system will not accept, so you should ask for
       users' mail addresses when this matters.  Furthermore, not all systems
       on which Perl runs are so forthcoming with this information as is Unix.

       The Mail::Util module from CPAN (part of the MailTools package) pro-
       vides a mailaddress() function that tries to guess the mail address of
       the user.  It makes a more intelligent guess than the code above, using
       information given when the module was installed, but it could still be
       incorrect.  Again, the best way is often just to ask the user.

       How do I send mail?

       Use the "sendmail" program directly:

	   open(SENDMAIL, "|/usr/lib/sendmail -oi -t -odq")
			       or die "Can't fork for sendmail: $!\n";
	   print SENDMAIL <<"EOF";
	   From: User Originating Mail 
	   To: Final Destination 
	   Subject: A relevant subject line

	   Body of the message goes here after the blank line
	   in as many lines as you like.
	   EOF
	   close(SENDMAIL)     or warn "sendmail didn't close nicely";

       The -oi option prevents sendmail from interpreting a line consisting of
       a single dot as "end of message".  The -t option says to use the head-
       ers to decide who to send the message to, and -odq says to put the mes-
       sage into the queue.  This last option means your message won't be
       immediately delivered, so leave it out if you want immediate delivery.

       Alternate, less convenient approaches include calling mail (sometimes
       called mailx) directly or simply opening up port 25 have having an
       intimate conversation between just you and the remote SMTP daemon,
       probably sendmail.

       Or you might be able use the CPAN module Mail::Mailer:

	   use Mail::Mailer;

	   $mailer = Mail::Mailer->new();
	   $mailer->open({ From    => $from_address,
			   To	   => $to_address,
			   Subject => $subject,
			 })
	       or die "Can't open: $!\n";
	   print $mailer $body;
	   $mailer->close();

       The Mail::Internet module uses Net::SMTP which is less Unix-centric
       than Mail::Mailer, but less reliable.  Avoid raw SMTP commands.	There
       are many reasons to use a mail transport agent like sendmail.  These
       include queuing, MX records, and security.

       How do I use MIME to make an attachment to a mail message?

       This answer is extracted directly from the MIME::Lite documentation.
       Create a multipart message (i.e., one with attachments).

	   use MIME::Lite;

	   ### Create a new multipart message:
	   $msg = MIME::Lite->new(
			From	=>'me@myhost.com',
			To	=>'you@yourhost.com',
			Cc	=>'some@other.com, some@more.com',
			Subject =>'A message with 2 parts...',
			Type	=>'multipart/mixed'
			);

	   ### Add parts (each "attach" has same arguments as "new"):
	   $msg->attach(Type	 =>'TEXT',
			Data	 =>"Here's the GIF file you wanted"
			);
	   $msg->attach(Type	 =>'image/gif',
			Path	 =>'aaa000123.gif',
			Filename =>'logo.gif'
			);

	   $text = $msg->as_string;

       MIME::Lite also includes a method for sending these things.

	   $msg->send;

       This defaults to using sendmail but can be customized to use SMTP via
       Net::SMTP.

       How do I read mail?

       While you could use the Mail::Folder module from CPAN (part of the
       MailFolder package) or the Mail::Internet module from CPAN (part of the
       MailTools package), often a module is overkill.	Here's a mail sorter.

	   #!/usr/bin/perl

	   my(@msgs, @sub);
	   my $msgno = -1;
	   $/ = '';		       # paragraph reads
	   while (<>) {
	       if (/^From /m) {
		   /^Subject:\s*(?:Re:\s*)*(.*)/mi;
		   $sub[++$msgno] = lc($1) || '';
	       }
	       $msgs[$msgno] .= $_;
	   }
	   for my $i (sort { $sub[$a] cmp $sub[$b] || $a <=> $b } (0 .. $#msgs)) {
	       print $msgs[$i];
	   }

       Or more succinctly,

	   #!/usr/bin/perl -n00
	   # bysub2 - awkish sort-by-subject
	   BEGIN { $msgno = -1 }
	   $sub[++$msgno] = (/^Subject:\s*(?:Re:\s*)*(.*)/mi)[0] if /^From/m;
	   $msg[$msgno] .= $_;
	   END { print @msg[ sort { $sub[$a] cmp $sub[$b] || $a <=> $b } (0 .. $#msg) ] }

       How do I find out my hostname, domainname, or IP address?

       gethostbyname, Socket, Net::Domain, Sys::Hostname" (contributed by
       brian d foy)

       The Net::Domain module, which is part of the standard distribution
       starting in perl5.7.3, can get you the fully qualified domain name
       (FQDN), the host name, or the domain name.

	       use Net::Domain qw(hostname hostfqdn hostdomain);

	       my $host = hostfqdn();

       The "Sys::Hostname" module, included in the standard distribution since
       perl5.6, can also get the hostname.

	       use Sys::Hostname;

	       $host = hostname();

       To get the IP address, you can use the "gethostbyname" built-in func-
       tion to turn the name into a number. To turn that number into the dot-
       ted octet form (a.b.c.d) that most people expect, use the "inet_ntoa"
       function from the  module, which also comes with perl.

	   use Socket;

	   my $address = inet_ntoa(
	       scalar gethostbyname( $host || 'localhost' )
	       );

       How do I fetch a news article or the active newsgroups?

       Use the Net::NNTP or News::NNTPClient modules, both available from
       CPAN.  This can make tasks like fetching the newsgroup list as simple
       as

	   perl -MNews::NNTPClient
	     -e 'print News::NNTPClient->new->list("newsgroups")'

       How do I fetch/put an FTP file?

       LWP::Simple (available from CPAN) can fetch but not put.  Net::FTP
       (also available from CPAN) is more complex but can put as well as
       fetch.

       How can I do RPC in Perl?

       (Contributed by brian d foy)

       Use one of the RPC modules you can find on CPAN (
       http://search.cpan.org/search?query=RPC&mode=all ).

AUTHOR AND COPYRIGHT
       Copyright (c) 1997-2006 Tom Christiansen, Nathan Torkington, and other
       authors as noted. All rights reserved.

       This documentation is free; you can redistribute it and/or modify it
       under the same terms as Perl itself.

       Irrespective of its distribution, all code examples in this file are
       hereby placed into the public domain.  You are permitted and encouraged
       to use this code in your own programs for fun or for profit as you see
       fit.  A simple comment in the code giving credit would be courteous but
       is not required.



perl v5.8.8			  2006-01-07			   PERLFAQ9(1)