| |
ANVIL(8) ANVIL(8)
NAME
anvil - Postfix session count and request rate control
SYNOPSIS
anvil [generic Postfix daemon options]
DESCRIPTION
The Postfix anvil(8) server maintains short-term statistics to defend
against clients that hammer a server with either too many simultaneous
sessions, or with too many successive requests within a configurable
time interval. This server is designed to run under control by the
Postfix master(8) server.
The anvil(8) server maintains no persistent database. Standard library
utilities do not meet Postfix performance and robustness requirements.
CONNECTION COUNT/RATE LIMITING
When a remote client connects, a connection count (or rate) limited
server should send the following request to the anvil(8) server:
request=connect
ident=string
This registers a new connection for the (service, client) combination
specified with ident. The anvil(8) server answers with the number of
simultaneous connections and the number of connections per unit time
for that (service, client) combination:
status=0
count=number
rate=number
The rate is computed as the number of connections that were registered
in the current "time unit" interval. It is left up to the server to
decide if the remote client exceeds the connection count (or rate)
limit.
When a remote client disconnects, a connection count (or rate) limited
server should send the following request to the anvil(8) server:
request=disconnect
ident=string
This registers a disconnect event for the (service, client) combination
specified with ident. The anvil(8) server replies with:
status=0
MESSAGE RATE LIMITING
When a remote client sends a message delivery request, a message rate
limited server should send the following request to the anvil(8)
server:
request=message
ident=string
This registers a message delivery request for the (service, client)
combination specified with ident. The anvil(8) server answers with the
number of message delivery requests per unit time for that (service,
client) combination:
status=0
rate=number
In order to prevent the anvil(8) server from discarding client request
rates too early or too late, a message rate limited service should also
register connect/disconnect events.
RECIPIENT RATE LIMITING
When a remote client sends a recipient address, a recipient rate lim-
ited server should send the following request to the anvil(8) server:
request=recipient
ident=string
This registers a recipient request for the (service, client) combina-
tion specified with ident. The anvil(8) server answers with the number
of recipient addresses per unit time for that (service, client) combi-
nation:
status=0
rate=number
In order to prevent the anvil(8) server from discarding client request
rates too early or too late, a recipient rate limited service should
also register connect/disconnect events.
SECURITY
The anvil(8) server does not talk to the network or to local users, and
can run chrooted at fixed low privilege.
The anvil(8) server maintains an in-memory table with information about
recent clients of a connection count (or rate) limited service.
Although state is kept only temporarily, this may require a lot of mem-
ory on systems that handle connections from many remote clients. To
reduce memory usage, reduce the time unit over which state is kept.
DIAGNOSTICS
Problems and transactions are logged to syslogd(8).
Upon exit, and every anvil_status_update_time seconds, the server logs
the maximal count and rate values measured, together with (service,
client) information and the time of day associated with those events.
In order to avoid unnecessary overhead, no measurements are done for
activity that isn't concurrency limited or rate limited.
BUGS
Systems behind network address translating routers or proxies appear to
have the same client address and can run into connection count and/or
rate limits falsely.
In this preliminary implementation, a count (or rate) limited server
can have only one remote client at a time. If a server reports multiple
simultaneous clients, all but the last reported client are ignored.
CONFIGURATION PARAMETERS
Changes to main.cf are picked up automatically as anvil(8) processes
run for only a limited amount of time. Use the command "postfix reload"
to speed up a change.
The text below provides only a parameter summary. See postconf(5) for
more details including examples.
anvil_rate_time_unit (60s)
The time unit over which client connection rates and other rates
are calculated.
anvil_status_update_time (600s)
How frequently the anvil(8) connection and rate limiting server
logs peak usage information.
config_directory (see 'postconf -d' output)
The default location of the Postfix main.cf and master.cf con-
figuration files.
daemon_timeout (18000s)
How much time a Postfix daemon process may take to handle a
request before it is terminated by a built-in watchdog timer.
ipc_timeout (3600s)
The time limit for sending or receiving information over an
internal communication channel.
max_idle (100s)
The maximum amount of time that an idle Postfix daemon process
waits for the next service request before exiting.
max_use (100)
The maximal number of connection requests before a Postfix dae-
mon process terminates.
process_id (read-only)
The process ID of a Postfix command or daemon process.
process_name (read-only)
The process name of a Postfix command or daemon process.
syslog_facility (mail)
The syslog facility of Postfix logging.
syslog_name (postfix)
The mail system name that is prepended to the process name in
syslog records, so that "smtpd" becomes, for example, "post-
fix/smtpd".
SEE ALSO
smtpd(8), Postfix SMTP server
postconf(5), configuration parameters
master(5), generic daemon options
README FILES
Use "postconf readme_directory" or "postconf html_directory" to locate
this information.
TUNING_README, performance tuning
LICENSE
The Secure Mailer license must be distributed with this software.
HISTORY
The anvil service is available in Postfix 2.2 and later.
AUTHOR(S)
Wietse Venema
IBM T.J. Watson Research
P.O. Box 704
Yorktown Heights, NY 10598, USA
ANVIL(8)
|